Vaporesso FORZ TX80, Руководство пользователя

Страница: 7 / 64

4 English
1) Short-circuit Protection: When a short circuit is detected,
the device will stop working and show “SHORT ATOMIZER” on
the screen.
2) Resistance Protection: When a low resistance is detected,
the device will stop working and show “LOW ATOMIZER” on
the screen. When a high resistance is detected, the device will
stop working and show “HIGH ATOMIZER” on the screen.
3) No Load Protection: When the device cannot detect
the coils, the device will stop working and show “CHECK
ATOMIZER” on the screen.
4) Low Voltage Protection: When the battery working voltage
is extremely low, the device cannot be operated and “LOW
BATTERY” will be showed on the screen.
5) Over Voltage Protection: The main MCU keeps monitoring
the output voltage to ensure it does not exceed the rated
voltage. If it does, the device will stop working.
6) Over charge Protection: When the battery is fully charged,
the device will stop charging and show “100%” on the screen.
7) Over discharge Protection: When the voltage drops to a low
value, the device will stop working.
8) Overtime Protection: The device will stop working if you
vape for more than 10 seconds at a time, and “TIME OVER” will
show on the screen.
9) USB High Voltage Input Protection: When the USB port
detects an input voltage exceeding the rated voltage, the
device will stop charging.
PROTECTIONS
CAUTIONS
1. Please turn off the device when it is not in use.
2. Do not leave the charging device unattended.
3. Do not drop, throw or abuse your device, which may cause
damage.
4. Please use a standard USB output charger with proper
charging current and voltage range.
5. Keep away from the water or any flammable gas, liquid.
6. Do not expose the device to direct sunlight, dust, moisture
or mechanical shock.
7. Do not expose the device to extreme temperature.
(Recommended temperature range: -10~60
℃
/14~140
℉
while
using and -10~45
℃
/14~113
℉
while storing).
8. EEE Recycling: The product should not be treated as
household waste, instead, it should be handed over to the
applicable collection point for the recycling of electrical and