V4L
®
offers several starter kits. This is a list of possible
components that came with yours:
E-cigarette Batteries
USB Wall charger
USB Charger
Car Adapter
It’s really simple to fill a blank e-cig cartridge to vape with
your Vapor Titan
®
e-cigarette. Follow these easy steps to set
yourself up for success. These cartridges are refillable and
can be used multiple times.
Gently remove the white cap at the end of the cartridge.
Add roughly 25 drops of e-liquid to the cotton filler until it is
fully saturated.
Let the e-juice settle for a few minutes.
Replace white cap and screw the cartridge back onto your
Vapor Titan
®
.
When flavor starts to weaken, repeat and vape on!
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
V4L
®
recommends fully charging your V4L
®
e-cigarette battery
before using for the first time. The batteries are charged
75–90% when you receive them. To charge them fully, simply
screw the threaded end of the battery into the charger of your
choice and plug in the charger. The LED tip on the end of the
battery should blink several times, then the indicator light on
the charger will turn from green to red. Once the battery is
fully charged, the indicator light on the charger will turn back
to green.
If you are using the USB charger, the indicator light on
the charger will turn from blue to red. Once the battery is fully
charged, the indicator light on the battery will turn
back to blue.
Once you have fully charged you V4L
®
battery, you are ready
to use your e-cigarette for the first time.
Take out 1 cartomizer from the pack. Remove the rubber end
caps. If your particular cartomizer has a rubber plug, remove
that too. Then screw the cartomizer onto the battery. Make
sure the threads are aligned to ensure a proper seal.
To use an automatic battery (no button on the side), simply
puff on the e-cigarette just like a traditional cigarette.
Automatic batteries work best by taking long, slow drags. To
activate a manual battery, press the small button on the side
while you are puffing. When you draw on the battery you
might hear a slight sizzling sound coming from the cartomizer.
This is normal and comes from the vaporization of the e-juice.
Draw on the electronic cigarette for 3–7 seconds and when
you exhale you will see the vapor. While you are drawing on
the e-cigarette, the LED tip on the end of the battery will light
up. The best way to use an e-cigarette is to use it the way you
would traditional cigarettes. With traditional cigarette, you
would puff the cigarette 10–15 times and it will be gone. With
an e-cig you can puff 10–15 times and put it down until you
wish to use it again. Each cartomizer lasts about 200 puffs.
When the cartomizer develops a slight “burnt marshmallow”
taste, it is near exhaustion and needs to be replaced.
A battery will last 3–6 hours before it needs to be recharged,
depending on the use and battery size. When the battery is
fully depleted, the LED tip on the battery will blink several
times, indicating that the battery needs to be recharged.
•
Carrying Case
•
Portable Charging Case
•
Pack of 5 Cartomizers
CHARGING
BATTERIES
HOW TO FILL A
CARTRIDGE
COMPONENTS
FIRST TIME USE
