Vapor Clean Pro6 Duo, Руководство пользователя

Страница: 13 / 16

Regular anti-scale treatment is necessary to ensure your machines long life and
efficient operation. The frequency of descaling depends on the type of water used
and length of time water has remained in your boiler. With water of low to
average hardness and normal domestic use, descaling is recommended at least
every three months.
Unscrew and remove the drain plug from the bottom of the machine.
Drain the machine completely.
Put the drain plug back in the machine.
Pour 2 cups of white distilled vinegar in the reservoir and fill the rest with
filtered tap water.
Turn on the machine and let the pump start pumping through the machine
into the boiler.
When the audible signal to add water starts, turn off the machine and let sit
for at least 15 minutes up to overnight if you choose.
Fill your reservoir with water, allow the pump to complete filling the boiler. As
soon as the pumping stops and the boiler is full, turn off the machine, cool
down and drain the boiler.
Refill with clean water and proceed normal operation. 1.
2.
3.
4.
5.
6.
7.
8.
Maintenance
Descaling
IMPORTANT! Before all maintenance operations, make sure the machine is
turned off and the power cord is not connected to the main power supply.
After use of the brushes, to prevent undue deformation, allow the bristles to cool in
their normal position.
Occasionally check O-Rings for cracks and apply Vaseline if needed.
Maintain your boiler by draining the water and descaling if the machine was stored
for an extended period of time (3+ Months). Follow the instructions below to descale
your machine. 1.
2.
3.
Get the most out of your machine by
visiting our product page when you
scan the barcode. You will find FAQs,
maintenance and more!
10
Descaling with White Distilled Vinegar
To scan, open camera app on
mobile device and hover over
barcode.