Herb Tube Attachment
For best taste, we recommend following the procedure below to eliminate any plastic
tastes:
1.
Soak tube in warm-hot (not boiling!) water for 30 minutes. Tip: Add essential oils to
water for better taste. Essential Oils are available for purchase at
Vapir.com
2.
Remove cap by twisting top portion of unit and
flipping cap over.
3.
Insert warm tube through back of cap.
4.
Use clean pliers to pull tube through cap.
Tube attachment is for flavor delivery purposes. Never put your mouth to outlet valve.
It may be hot. Always either use a tube or taste flavor from a distance of several inches
without touching the outlet valve.
Quick Tips:
•
Insert tube before use.
•
Grind herbs in either our Element, Max or Maxine Herb Grinders (sold seperately) or in
a coffee grinder.
•
Preheat Vapir ONE unit to 250°F with the drawer out. Wait for light to turn green, then
insert the disk drive. If you are not getting enough flavor turn the tempurature up. If you
are getting smoke, turn the tempurature down.
•
Inhale the flavor immediately upon insertion.
•
When inhaling, breathe deeply. Hold the vapor in. Repeat for 10 -15 minutes.
•
Remember, visible vapors will not always be present.
