background image

After opening the carton, unpack your new product and related parts and accessories. Please 

inspect it carefully for any damage that may have occurred during transit. Please check it against 

the photograph on carton. If any parts are missing, please call factory customer service at  

1-800-386-0191.

  Do not operate this product if damaged during shipment, handling or 

misuse. Do not operate the product until the parts have been replaced or 

the fault rectified. Failure to do so may result in serious personal injury or 

property damage.

All damaged parts must be repaired or replaced as needed prior to operating this product.

Check to see that all nuts, bolts and fittings are secure before putting this tool into service. If you 

have any questions, or require assistance with damaged or missing parts, please contact our 

factory customer service department at:

1-800-386-0191

Please have the model number, and date of purchase available for reference when calling.

 

 

MODEL NUMBER:  19220

  

DATE of PURCHASE:

It is the owner and/or operators responsibility to study all WARNINGS, operating, and 

maintenance instructions contained on the product label and instruction manual prior to 

operation of this product. The owner/operator shall retain product instructions for future 

reference.

The owner and/or operator are responsible for maintenance, maintaining all decals or warning 

labels and while in use, maintaining the unit in good working order. If the owner and/or operator 

are not fluent in English, the product warnings and instructions shall be read and discussed 

with the operator’s native language by the purchaser/owner or his designee. Make sure that the 

operator comprehends its contents. Safety information shall be emphasized and understood prior 

to usage. The product shall be inspected per the operating instructions.

Users of this product must fully understand these instructions. Each person operating the product 

must also be of sound mind and body and must not be under the influence of any substance that 

might impair their vision, dexterity, or judgment.

Protect yourself and others by observing all safety information.

Failure to comply with instructions could result in personal injury and/or property damage!

If you encounter any problems or difficulties, please contact our customer service department at:

1-800-386-0191

This instruction manual is intended for your benefit. Please read and follow the safety, 

installation, maintenance and troubleshooting steps described within to ensure your safety 

and satisfaction. The contents of this instruction manual are based upon the latest product 

information available at the time of publication. The manufacturer reserves the right to make 

product changes at any time without notice.

2

3

INTRODUCTION

  Read and understand this entire instruction manual before attempting 

to assemble, install, operate or maintain the product. Failure to comply 

with the instructions may result in serious personal injury and/or property 

damage!

The following signal words are used to emphasize safety warnings that must be followed when 

using this product:

  Indicates an imminently hazardous situation that, if not avoided, WILL result 

in death or serious injury.

  Indicates a potentially hazardous situation that, if not avoided, COULD 

result in death or serious injury.

  Indicates a potentially hazardous situation that, if not avoided, MAY result in 

minor or moderate injury.

  Indicates important information, which if not followed, may cause damage 

to equipment.

SAFETY ALERT

UNPACKING & INSPECTION

Содержание 19220














Отзывы: