requires manual selection of current, while Auto mode does not. Now let's explain the
following operations in manual mode.
2.3 If the battery is reversed, “ Err” will be prompted in LCD screen. Users put the
battery correctly into the charger.assuming that it is placed in the second slot, CH2
characters will appear on the display screen. Charger will automatically determine
whether the battery is li-ion or Ni-Mh,Ni-Cd, and it's displayed on the screen.
2.4 At this time, The default Charge mode, Charge is displayed on the LCD screen and
flickers. If you need to switch other modes, Discharge,Cap test,Storage,Repair
mode,please keep pressing MODE to find the desired mode.The current 500mA on the
LCD screen is also flickering. The default charge or discharge current of the system is
500mA.
2.5 Now the charge and current flash at the same time, and the reminder is the common
regulation mode,we can select the same mode and current for multiple batteries at the
same time.Put multiple batteries of the same type into other slots within 5 seconds, and
then press MODE or CURRENT to select the desired operation. Then multiple batteries
have the same mode and current, which can save operation time. If you press display
within 5 seconds after placing the first battery, you will exit the common adjustment
mode, and mode and current will flash to remind the user of operation. If the first battery
is not operated for more than 5 seconds, it will exit the common regulation mode by
default and only charge this battery with 500mA current.
2.6 At the top of the LCD screen, there are four cylinders, representing four slots, which
can display the charging status of four batteries. There are five small black grid in the
cylinder, representing a rough percentage of capacity. This is based on the battery voltage.
They represent 20%, 40%, 60%, 80% and 100% of battery capacity respectively.If
charged in the second slot ,If the battery is charged in the second slot,The small grid in
the second cylinder of the display will continue to increase to the fifth grid, and then start
