VAPamore MR-750 OTTIMO, Инструкция и руководство пользователя

Страница: 5 / 26

The accessory tool adaptor (#4 on parts overview
page) is required when using the jet nozzle
attachment, detail scraper, and all round detail
brushes. Align the accessory with the arrow on the
accessory tool adapter and twist to lock into place.
The accessory tool adapter can be used directly on
the steam gun or can be used with the extension
tubes. (Fig.2 & 3)
Accessory
storage
basket
The MR-750 Ottimo has an accessory storage
basket and storage bag. Once all the accessories
have been unpacked use the accessory storage bag
and basket to carry all the accessories. The storage
bag can be hung on the loop on the back of the
storage basket. (Fig.1)
Accessories twist lock onto
the accessory tool adapter
Accessory tool adapter
attaches to the steam
gun or extension tubes.
ACCESSORIES AND TOOLS
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
GO TO VAPAMORE.COM TO SEE THE MR-750 OTTIMO INSTRUCTIONAL VIDEO
Steam
hose
socket
The large elbow adaptor (#14 on parts overview
page) is required when using the floor head (#15 on
parts overview page). With the large elbow adapter
facing down, insert into the floor head until
completely inserted then rotate up. The adapter will
only insert when facing down and then locks into
position and allows the adapter to rotate when in
use. The large elbow adapter can be used directly
on the steam gun or with the extension tubes. Always
use the micro fiber pad with the floor head. Wrap the
micro fiber pad around the ends of the floor head and
hold in place under the spring clips. (Fig.4)
Use large
elbow
adapter for
floor head.
The detail jet tool and the bed bug / fabric tool (19 &
20 on parts overview page) can be connected
directly to the steam gun or the extension tubes.
(Fig.5)
Use with steam gun
or extension tubes
STEAM GUN / EXTENSION TUBES
The steam gun connects to the steam socket located
on the front panel of the machine. Flip the dust cover
open and push the hose connector firmly into the
socket until both tabs click into place. Remove the
steam hose by pressing in both release tabs while
pulling out. (Fig.1)
The steam gun has a trigger (ON) lock located just
behind the trigger. This lock can be used for
continuous steam without having to hold the trigger.
To set the lock, push down the trigger, then while the
trigger is down slide the lock to hold the trigger.
Extension tubes can be used for floors or difficult to
reach areas. The extension tubes push and lock into
place on the steam gun. (Fig.6)
Trigger lock
Extension tubes
lock and release
Storage
bag hook
Use micro
fiber pad
with floor
head.