Vantrue VP05, Руководство пользователя

Страница: 13 / 79

- 9 -
Insert the TYPE-C end into the dash cam,
start the ignition, waiting for the dash cam
to start.
Note: If the dash cam doesn’t turn on after
startup, please check whether the cable is
well connected. Then you can contact
VANTRUE service staff for help.
After the dash cam starts, turn off the car
and unplug the key to check if the dash
cam is turned off or goes into parking
mode.
Note: Some vehicles require turning off the
engine and opening the driver's door to
trigger the ACC power off signal, and a
few vehicles only trigger the ACC power
off signal after a period of time after
turning off and locking the vehicle. These
two types of vehicle require checking
whether the dash cam is turned off or
enters parking mode after the ACC power
is turned off.
(1)
(2)
Step 3, Test your installation according to
below steps
ENENEN EN