B. Automatically
When connected to the car charger, the camera will auto-power
ON after you start your car and the battery charging will commence.
The camera will power OFF 5 seconds after you turn off the car
engine.
After powering on, press the MODE button to enter the setup menus.
(If the camera is recording video, press the REC button to stop the
recording and then press the MODE button.)
Press REC button to enter the settings, and press UP/DOWN button
to select setting items.
-
Resolution:
Default setting is 2304x1296/30F (fps: Frames per Seconds).
Press Down button to select among 1920x1080/30 F, 1280x720/60F
and 1920X1080/30F(HDR).
-
Loop Recording:
Default setting is 3mins per video clip. Press Down
button to select among 1 mins, 3mins, 5 mins and OFF.
-
G-Sensor Set:
Default setting is Medium. Press DOWN button to select
among OFF, Low, Medium and High.
-
Mic:
Default setting is On. Press DOWN button to turn it OFF/ON.
-
Parking monitor:
Default setting is OFF. Press Down and REC button
to turn it ON/OFF.
-
Exposure:
Default setting is 0.Press REC and Down button to select
among 1,2,0,-1 and -2.
-
Car Number Setup:
Press REC and UP/DOWN button to setup date
and time. When finished, press REC button to exit.
4.2. Settings in the menu
A. Record setup
- 8 -
Содержание OnDash R3
Страница 1: ...User Manual OnDash R3 Dash Cam ...
