Vantrue OnDash N2 Pro, Руководство пользователя

Страница: 14 / 122

A. Record Setup
Press the DOWN button and highlight the Record
Setup option. Press the OK button to enter the
settings, and use the UP/DOWN buttons to navigate
the different options.
- Resolution: By default (DUAL CAM RECORDING
mode), both cameras record at 1920x1080P (30fps).
In SINGLE FRONT CAM RECORDING mode,
2560x1440P (30fps), 2304x1296P (30fps), 1920x1080P
(60fps), 1920x1080P (30fps) options are available.
- Loop Recording: This is set to 3minutes per video
clip. Press OK to change the duration: 1,3, 5, or OFF.
- G-Sensor Set: Set to Medium by default. Pressing OK
gives the following sensitivity options: High, Medium,
Low, Off.
- Audio Recording: Default is ON. Press OK and
DOWN button to toggle it OFF/ON.
- Parking Monitor: Default is OFF. Press DOWN
followed by OK to toggle it OFF/ON.
- Front Camera Exposure: Default is Default is 0.
Pressing OK gives the following options: 0, -1.0, -2.0,
+2.0, +1.0
- Inside Camera Exposure: Default is Default is 0.
Pressing OK gives the following options: 0, -1.0, -2.0,
+2.0, +1.0
- Car Number Plate: Press UP/DOWN and OK to set
your car license number.
- Stamp: Default is ON. Press OK to toggle it OFF/ON.
Stamp shows the date/time, logo, car number,
Speed and GPS Location information.
- Rotate Display: Default is OFF. Press OK and DOWN
button to toggle it OFF/ON.
- 13 -
- Time Lapse: Default is OFF. Press DOWN followed
by OK to set time interval: 1 Sec, 5 Sec, 10 Sec,
30Sec, 1Min, Off.
- Power Off Delay: Default setting is ON, forcing the
camera to automatically end recording and turn
off after you power down the car. Press OK and
DOWN button to toggle it OFF/ON.To finish setup,
press the MENU button to exit.