Vantrue Mirror 3, Руководство пользователя

Страница: 16 / 113

- 12 -
4. Basic Operation
4.1 Turn ON/OFF the camera
4.2 Switch the Front, Cabin and Rear camera window display
Once connected to the car charger, the camera will auto-
power on after you start your car. It will auto off after you
turn off the car engine even if it is recording. You can also
long-press the Power Button to turn on/off the camera.
Please charge the dash cam with an included car charger
or hardwire kit on your car.
After the car is turned off, if the hardwire kit is connected
and the park mode is turned on, the dash cam will
automatically enter the park mode, otherwise it will
automatically shut down.
Note:
1.
2.
In the recording interface, click the small window to switch
the large screen display of the screen inside or behind the
car.
1.
In 3-way recording mode, there are two ways to switch
between the front, cabin, and rear view.
Time Lapse: Select the video frames of time lapse. 1FPS/3F-
PS/ 5FPS/10FPS/OFF optional.
Number Plate: Select the number or letter to be set. After
setting, your license plate number can be displayed in the
recorded video.
GPS: GPS is enabled by default. GPS ON/OFF settings speed
unit settings, and GPS information are all set here.
Stamp: Enable or disable the watermark stamp of the video
and photos. The watermark stamp includes VANTRUE label,
date and time label, and speed label.
Default Settings: Reset the device back to factory settings.
System Info: Check the Model Number/Firmware Version/
Website/MCU Version.
EN EN