3. Getting Started
3.1 Powering the Camera
3.2 Powering the Camera
1) Insert one end of the included charging cable into the USB
jack on the back of the camera.
2) Insert the other end into the included power adapter. Then
insert the adapter into the socket.
After being powered on, the camera will automatically turn on.
(The green light on the base of the camera is on for a few
seconds. At this point, the camera is turned on successfully).
1) Charge the monitor via the supplied charging cable and
adapter (The monitor is provided with a lithium battery, if the
monitor has enough power, please go directly to the Step 2)
- 5 -
