VT-TABLET-5081-N
16
/
17
safety tips for operation environment.
Notice
Considering that reasonable efforts have been made to assure accuracy of this
manual, Vantron assumes no responsibility of possible missing contents and information,
errors in contents, citations, examples, and source programs.
Vantron reserves the right to make necessary changes to this manual without prior
notice. No part of this manual may be reprinted or publicly released in forms of
photocopy, tape, broadcast, e-document, etc.
Exposure to Radio Frequency Energy
This product has been tested and meets the SAR (Specific Absorption Rate)
exposure requirements. The product is designed and manufactured to comply with the
limits for exposure to RF energy set by the Federal Communications Commission (FCC)
of the United States. The exposure standard employs a unit of measurement known as
the specific absorption, or SAR. Tests for SAR are conducted using standard operating
positions specified by these agencies, with this product transmitting at its highest
certified power level in all tested frequency bands.
This product has been tested, and meets the FCC RF exposure guidelines.
The highest value for body SAR is 1.35 W/kg.
FCC Warning
This device complies with FCC class B Rules. Operation is subject to the
Following conditions.
This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
