IQ Hub v1.1
19
/
22
responsibility for the accuracy of any statements contained herein.
Safety Precautions - Static Electricity
Follow instructions below to protect yourself from harm and the products from damage:
1. Being sure you are at an ESD workstation, or grounded with an ESD strap before opening the
top cover or installing/removing any unit accessible from the out- side. Doing so will discharge
any static electricity that might have built up in your body.
2.
Don’t touch any components inside the system while the system is on.
3. Disconnect power before making any configuration changes. The sudden rush of power as
you connect a jumper or install a card may damage sensitive electronic components.
4. When unpacking a static-sensitive component from its shipping carton, do not remove the
component's antistatic packing material until you are ready to install the component in the unit.
5. When transporting any electrical component, first place it in an antistatic con- tainer or
packaging.
Waste Disposal
It is recommended to disassemble the device before abandoning it in conformity with local
regulations. Please ensure that the abandoned batteries are disposed according to local
regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste
canister. Products or product packages with the sign of “explosive” should not be disposed
likehousehold waste but delivered to specialized electrical
＆
electronic waste recycling/disposal
center. Proper disposal of this sort of waste helps avoiding harm and adverse effect upon
surroundings and people’s health. Please contact local organizations or recycling/disposal center
for more recycling/disposal methods of related products.
Comply with the following safety tips:
Do not use in combustible and explosive environment
Keep away from combustible and explosive environment for fear of danger.
Keep away from all energized circuits.
Operators should not remove enclosure from the device. Only the group or person with factory
certification is permitted to open the enclosure to adjust and replace the structure and
components of the device. Do not change components unless the power cord is removed. In
some cases, the device may still have residual voltage even if the power cord is removed.
Therefore, it is a must to remove and fully discharge the device before contact so as to avoid
injury.
