UGT-PC20SR
Page 4
4.
To install the card, carefully align the card’s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Secure the computer cover and reconnect the power cord.
Driver Installation
1.
Insert the provided CD into your CD-ROM drive.
2.
At the Windows Desktop, click
Start
, and then
Run
.
3.
When the prompt displays
For Windows XP/Vista/7/8 32-bit – Enter “
D:\UGT-
PC20SR\Windows\32Bit\PCISetup.exe
” (where “D” is the
designation of your CD drive)
For Windows XP/Vista/7/8 64-bit – Enter “
D:\UGT-
PC20SR\Windows\64Bit\PCISetup.exe
” (where “D” is the
designation of your CD drive)
4.
Follow the on-screen instructions to complete the installation.
