Vantec NexStar HX2R, Руководство пользователя

Страница: 19 / 28

8.RAID Rebuild:
Dual 3.5” SATA to USB 3.0 & eSATA External RAID Hard Drive Enclosure w/ Fan
RAID Rebuild
15
NOTE:
1. Rebuild speed around 250GB/HR
2. Anytime when a HDD failure is detected, the LED blinks at a constant pace.
3. Online: Power cable is connected to the device, USB or eSATA cable is connected to the computer.
Offline: Only power cable is connected to the device.
RAID rebuild can only be performed under RAID 1 configuration. Please follow the following steps
to start rebuilding.
1. Power off the NexStar HX2R.
2. Remove failed hard drive.
3. Install a functional hard drive.
4. Turn on the power and the NexStar HX2R will automatically start rebuilding.
LED Configuration on Rebuild Process
LED Activity Chart: this chart describe LED activity under RAID rebuild process
Constant On
Blinks Irregularly
RAID Rebuild
Operations HDD1 LED HDD2 LED Power LED Fan
Offline
Online
In Progress
Complete
In Progress
Complete
On
On
On
Off