Installation Guide
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without written permission is strictly forbidden.
Printed in China
Printed on Recycled Paper.
Copyright © 2014 Vantec Thermal Technologies. All Right Reserved. | All Registered Trademarks Belong To Their Respective Companies.
Model: UGT-MST100
/
MRK-MST250
Verify the package contents.
1.
Attach mSATA Device by inserting the mSATA
card and securing the two screws to hold the
mSATA card in place.
2.
1.
2.
3.
Replace cover and secure with 4 screws.
3.
The device is ready to be integrated into
your system.
4.
Installing MRK-MST250
If you are using shorter (27mm) or longer (70mm) mSATA card, please use the instructions on page 2 to adjust the card mount.
Installing UGT-MST100
If you are using shorter (27mm) or longer (70mm) mSATA card, please use the instructions on page 2 to adjust the card mount.
Attach mSATA Device by inserting the mSATA
card and securing the two screws to hold the
mSATA card in place.
2.
1.
2.
3.
Verify the package contents.
1.
3.
The device is ready to be integrated into
your system.
