Vante SEBRA MINI 2380, Руководство по эксплуатации

Страница: 15 / 33

9
P/N VT-108723-US, Manual revision: C Vante
®
SEBRA
®
MINI
™
Tube Sealer Power Source
Table 2-1, 2380 Sealer Component Functions
Operating environment
The Power Source will perform effectively when used in a typical blood bank,
blood processing facility or transfusion center environment. Variations in actual
environmental conditions of the facility and/or the level of contamination and/or
moisture on the ground and RF jaws and/or tubing exterior may affect actual
performance. Users are advised that when temperature and humidity
conditions seem less than what might be considered comfortable for humans,
it is best to slow the rate of repetitive sealing, to be certain the sealing head and
tubing are clean and dry, and to frequently check the quality of seal being
produced.
The Power Source and Sealing Head should be stored between 10
°
and 122
°
F (-12
°
and 50
°
C). To ensure optimal performance, it is recommended that the
sealer be acclimated to the ambient environmental operating temperature for
approximately one hour prior to use.
RF Power Output Female BNC connector providing RF power to
the Model 1105 sealing head through the RF
power cable. Located on the power interface
panel.
Battery Low Light Amber LED located on the front of the RF
power source. Illuminates when the battery
requires recharging. An audible signal is also
sounded to alert the user of the low battery
condition.
Serial Plate Indicates the model number, the serial number,
and the required power input of the RF power
source. Located on the underside of the unit.