Vante 4160, Инструкция по эксплуатации

Страница: 23 / 40

Vante ® Model 4160
15
2.5. System settings
2.5.1. Only users with an administrative password can access the system settings
screen. Log in to the system with the administrator password. On the main
control screen, press the
settings button (#17 in Figure 2.3 on page 12).
NOTE: It is not necessary to verify thermocouple temperature verification or adjustment
when system settings are changed. Refer to Product Certification on page 23 for
more information.

The system settings screen opens. See Figure 2.5.
Figure 2.5 System settings screen
2.5.2. The systems settings screen contains the following controls:
1.
Internal air switch: press the button to select the air pressure source.
When the switch is on, the internal air compressor is activated. When the
switch is off, the internal air compressor is deactivated.
CAUTION: If the internal air switch is off, then an external air supply must be connected to
the generator/controller.
2. Serial number and software version: the generator/controller serial
number and software version are displayed on the system settings screen.
Refer to this screen when contacting Vante for service.
3. Cool temp: this field displays the target temperature for cooling during a
run cycle. The value in this field automatically changes, depending on the
air source (internal compressor or external supply).