4
Figure 2.3 Fuse labels
WARNING:
To avoid personal injuries or equipment damage use specified fuses only.
2.2.
Uncrating
2.2.1.
Remove the RF generator and peripheral components from their shipping
cartons. Inspect all components for damage. If any components are damaged,
contact Vante.
2.2.2.
The serial plate indicates the model number and serial number of the unit.
Refer to the serial number when contacting Vante or one of its authorized
service centers.
2.2.3.
Verify that the supplied power cable is compatible with your facility’s power
supply. Contact Vante if necessary to request a different power cable.
CAUTION:
Do not connect the power cable to AC mains at this time.
CAUTION:
Do not cover the top or side vents of the RF generator. Overheating can occur,
damaging the internal components.
WARNING
:
Do not
insert
or
remove
the AC power cord with the power switch in the
ON
( )
position.
WARNING
:
User must provide means to isolate air supply. 60 – 100 PSI max
WARNING:
Keep fingers clear of the sealing head jaws—injuries can occur from crushing or
RF burns.
CAUTION:
Severe damage to the sealing head electrodes occurs if fingers are introduced
between sealing head clamps.
2.3.
Installation—3806MOD/3807MOD handheld sealer (Sealing Head)
2.3.1.
3800 / 3806MOD (3807MOD) System:
Verify power OFF the 3800 generator.
Connect the external airline, to the AIR IN port on the generator. See
figure 2.1.
