Vanraam VeloPlus3, Руководство пользователя

Страница: 5 / 51

5/51
Version 21.01
The manufacturer is not responsible for any damage or injury caused as a result of or
during the course of any other type of use.
Safety measures
• Ensure the tricycle is in good condition each time before using it. Check before
each ride that the brakes are in order. Check the lighting and make sure there is
enough tyre pressure.
•
Regularly check if the wheels, the handlebars and the saddle are properly fixed
and also whether all screw joints are tight.
• Only use the tricycle on a solid and level surface .
•
Make sure that wide trousers or lose hanging clothing don’t get caught in the
chain, spokes or pedals.
•
Do not use a pressure washer or a steam cleaner for the cleaning of the tricycle.
• Block the tricycle to stop it from moving when you are getting on or off the
tricycle. Do this by using the parking brake and holding the tricycle. Also use the
parking brake if the wheelchair is driven on or off the ramp.
•
Always lock the tricycle when leaving it unattended.
• Never drive without a passenger. This will cause instability of the bike and will
lead to dangerous situations.
•
Never place your feet or other limbs under the ramp. You can be hit by moving
parts and suffer from bruises.
•
Always place the wheelchair forward, in the driving direction, on the ramp.
• Your wheelchair is suitable for use when the centre of gravity can be placed
above the front wheels of the bicycle and when it can be fixed according to the
instructions on page
Fout! Bladwijzer niet gedefinieerd. .
•
Make sure that once the wheelchair is placed on the ramp, the wheelchair's
weight causes the ramp to fold up automatically. When that is the case, the
centre of gravity of the wheelchair is situated above the front wheels of the
bicycle. This creates the correct weight distribution of the bicycle.
•
Extra attention is required for an electric wheelchairs because these often have
different weight distributions as a result of which the centre of gravity may not
be positioned correctly.