24/55
Version 21.01
If not in use, the system will automatically shut itself down after some time.
Always switch off the electrical system before getting on and off the bicycle and
when walking with the bicycle.
2. Pedal assistance position 1, 2 or 3
The desired pedal assistance can be set by means of the assistance positions 1, 2 and 3.
1.
Low support, maximum range.
2.
Average support, average range.
3.
Maximum support, low operating radius.
You can change positions while cycling.
The range depends on various factors and is strongly influenced by: capacity and
voltage of the battery, degree of support, ambient temperature, wind force, tire
pressure, driving speed, weight of the rider and load, use of gears, etc.
3. Starting aid
The bicycle is equipped with a starting aid function. This allows the rider to accelerate up
to a speed of approximately 6 km/h for a maximum of six seconds, without pedalling. To
do this, the rider must hold the button down. The function is reactivated after pressing the
button again. When pedalling, the function works as long as the button is pressed for up to
six seconds, up to the maximum speed of the bike (20-25 km/h).
The starting aid function is used for:
•
Extra support when starting off.
•
Extra support when cycling up a hill.
On a steep climb, the assistance can be set to position 3, where the starting aid can be
pressed repeatedly for approximately six seconds for maximum support.
Содержание Easy Rider Medium
Страница 53: ...53 55 Version 21 01 Notes...
Страница 54: ...54 55 Version 21 01 Notes...
