Shenzhen VANQ Technology Co.,Ltd
VQ-GLTF800 Top Fill Light Specifications
4
AUS/NZS
plug 240V
US 5-15P
US 6-15P
US L7-15P
EU plug 230V
UK plug 240V
2.3
General Information
Product Name
GLTF800 800W LED Grow Light
Manufacturer
Shenzhen VANQ Technology Co., Ltd.
Version
US
EU
UK
AUS
Plug Type
US plug 120-277V EU plug 230V
UK plug 240V AUS/NZS plug 240V
Input Voltage
100-277VAC
100-277VAC
100-277VAC
100-277VAC
Note:Other types of plug are also available, please check with our sales engineers directly.
2.4
NOMINAL ELECTRICAL AC INPUT
AC Voltage
120V
208V
230V
277V
347V
380V
400V
480V
AC Current
7.0A
3.9A
3.5A
2.95A
2.3A
2.1A
2A
1.66A
AC Power
846W
808W
805W
800W
800W
800W
800W
800W
Power Factor
1
0.99
0.99
0.98
0.98
0.98
0.98
0.98
Note:The standard model comes with LED driver supporting only 100-277VAC input. 347V,
380V,400V, 480V needs to be specially customized, please check with our sales engineers directly.
3
Safety Precautions
Carefully read the safety Precautions below before using or working with the product.
1、Always adhere to the local rules and regulations when installing or using the LED light.
2、DO NOT connect to live power until installation is complete.
3、Do not open or disassemble the LED light. Opening or modifying the LED light can be dangerous
and will void the warranty.
4、Do not use the LED light when either the LED light or its power cord are damaged. Replace
the power cord only with original certified cords.
5、Modifications to the cords can lead to unwanted electromagnetic effects, which makes the
product not comply with legal requirements.
6、Do not expose the LED light to:
- (ambient) temperatures outside the specified range;
- dust and contamination;
- direct sunlight during use or HID light that could heat up the ballast.
7、Always disconnect the LED light from mains before performing any maintenance.
8、Always allow for a cool down period of at least 30 minutes before touching the LED bars. Touching
the LED bars when the light is lit or immediately afterwards can result in severe burns!
9、Do not use the LED light near flammable, explosive or reactive substances. Do not use sulfur
