Safety Precaution
Table of Contents
Warning
Installation and maintenance work shall only be performed by qualified persons, familiar
with local code and regulation, and experienced with this type of appliance.
All field wiring must be installed in accordance with the national wiring regulation.
Ensure that the rated voltage of the unit corresponds to that of the name plate before
commencing wiring work according to the wiring diagram.
The unit must be GROUNDED to prevent possible hazard due to insulation failure.
The earth wire is approximately 60mm longer than safety wire. This is to ensure at the
event whereby the suspension system fails, the (L) and (N) wire will break leaving the
fan remain earthed to prevent electrocution.
Tighten the blade firmly using a screw driver.
Blades that are detached from the unit during operation will cause serious injuries and
property damages.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliances.
Confirm that the power supply has been switched OFF before installing or servicing the
unit. Ensure that the blade is fully static before doing any maintenance work.
1. Safety Precaution .................................................................................
2. Parts & Accessories .............................................................................
3. Installation Instruction ..........................................................................
4. Power Supply Connection ....................................................................
5. Circuit Diagram ....................................................................................
6. Transmitter Learning Process ..............................................................
7. Transmitter Function & Assembly ........................................................
8. Maintenance .......................................................................................
9. Technical Specifications .......................................................................
10. Customer Service Centre ...................................................................
Item
Page No.
9
1 - 2
3
4 - 7
8
10
11
12
12 - 13
13
