
4
ENGLISH
GB
6. Restore power supply to the appliance.
7. Press the control button [E] and keep it pressed. Afterwards, the control system switches to recording mode
and confirms with 2 brief blinking signals of the LED [13].
8. Now press any key of the radio remote control of G1 (the radio remote control of G2 is not required and
serves as a spare part (if the spare part is used, a new commissioning process must take place).
9. The LED briefly lights up as confirmation and now the radio remote control of G1 is ready to be used for
both appliances
10. Close the front cover.
11. Turn the lever of the locking cover [F] on the inside to the right to "ON".
12. Switch on/control the appliance pair with the radio remote control G1.
General instructions:
■
The appliance has a summer operation mode in addition to the 3 ventilation levels. Cross-ventilation is
achieved here, preferably during cool nights, by suspending the permanent change in direction of the
normal operation.
■
60 cm minimum distance between the appliances
■
Max. 10 m distance between an appliance pair
■
Max. one partition wall with a thickness of 15 cm
Cleaning and maintenance:
The automatic maintenance indicator appears at six-monthly intervals. The indicator light starts flashing.
Maintenance must be performed as follows:
a. Disconnect the appliance from the mains for cleaning and maintenance.
b. Remove the front cover (A) [16].
c. Loosen 3 screws [16;H] and remove the cover flap and locking cover [17].
d. Draw out the ceramic insert [18] at the retaining strap from the appliance and rinse with warm tap water.
e. Draw the filter cartridge [19] out of the appliance, open the filter basket and check filter mat for contamina-
tion and replace, if necessary.
f. Slide the filter cartridge and ceramic block back in, refasten the locking cover and cover flap.
g. Press the reset button of the filter control [13,E], (lamp flashes again at a six-monthly maintenance interval).
h Install inside panel.
i. Switch on the power supply again.
Replacement parts and accessories:
535326 =
MEnV 180 remote control
320687 =
MEnV 180 outer grille
535302 =
MEnV 180 ceramic
320663 =
MEnV 180 G3 filter mat
535319 =
MEnV 180 filter cartridge
Содержание MEnV180
Страница 12: ......