VANMAR VMS22T Скачать руководство пользователя страница 2

2

WWW.VANMAREQUIPMENT.COM

This manual is furnished with each new model. It provides necessary operation and 

maintenance instructions.

Read this manual completely and understand

the machine before operating or servicing it.

This machine will provide excellent service. However, the best results will be obtained at 

minimum costs if:

•  The machine is operated with reasonable care.
•  The machine is maintained regularly - per the machine maintenance instructions 

provided.

•  The machine is maintained with manufacturer supplied or equivalent parts.

To view, print or download manuals online visit 

www.vanmarequipment.com

.

INTENDED USE

The VMS22T is a commercial autoscrubber machine designed to wet scrub both rough and 

smooth hard surfaces (concrete, tile, stone, synthetic, etc). Typical applications include 

schools, hospitals / health care facilities, office buildings, and retail centers. Do not use this 

machine on soil, grass, artificial turf, or carpeted surfaces. This machine is intended for indoor 

use only. This machine is not intended for use on public roadways. Do not use this machine 

other than described in this Operator Manual.

PROTECT THE ENVIRONMENT

Please dispose of packaging

materials, used components 

such as batteries and fluids 

in an environmentally safe 

way according to local waste 

disposal regulations.
Always remember to recycle.

MACHINE DATA

Please fill this form at the time of 

installation for future references.
Model No.-
Serial No.-
Installation Date-

VANMAR EQUIPMENT CO.

18866 72nd Avenue South

Kent, Washington 98032

www.vanmarequipment.com

Specifications and parts are subject to change without notice.

Original Instructions. Copyright ©2015-2016 VANMAR EQUIPMENT COMPANY.

INTRODUCTION

Содержание VMS22T





































Отзывы: