CAST IRON STOVE
SAFETY INFORMATION
Oxford™ Models:
VCISB
Charcoal Black
PVCISG Porcelain Enamel Green
PVCISR Porcelain Enamel Red
PVCISS Porcelain Enamel Sand
PVCISB Porcelain Enamel Black
WARNING: If the information in this manual is not
followed exactly, a fire or explosion may result caus-
ing property damage, personal injury, or loss of life.
— Do not store or use gasoline or other flammable
vapors or liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s in-
structions.
• If you cannot reach your gas supplier, call the fire
department.
— Installation and service must be performed by a
qualified installer, service agency, or the gas
supplier.
WARNING: Improper installation,
adjustment, alteration, service, or
maintenance can cause injury or
property damage. Refer to this
manual for correct installation and
operational procedures. For as-
sistance or additional information
consult a qualified installer, ser-
vice agency or the gas supplier.
WARNING: The VCIS and PVCIS
Gas Stove Heaters are to be used
only with certain DESA appli-
ances. Do not burn wood or
other materials in these gas
stove heaters.
This stove may be installed in an aftermarket* permanently located, manufactured (mobile)
home, where not prohibited by state or local codes.
*Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer (i.e., Installation of this product is permit-
ted after the manufactured [mobile] home is sited).
Save this manual for future reference.
Save this manual for future reference.
For more information, visit www.desatech.com
For more information, visit www.desatech.com
®
For use with:
SVYD18NRA/PRA Vent-Free Insert*
SDVBND/PD Direct-Vent Insert
SBVBND/PD B-Vent Insert
* SVYD18NR/PR Series remote-ready gas
log heaters can be used with this stove as
long as the conversion kit 113051-01 is
used. Contact your supplier for details on
this conversion kit.
