Vanguard Instruments LTCA-10, Руководство пользователя

Страница: 37 / 58

LTCA-10/LTCA-40 USER’S MANUAL
37
Press the
[ENTER]
key to start capturing data for the time period selected in step e . The
LTC must be manually started to begin switching through the taps.
If the LTC cable is connected, then pressing the
[LTC RAISE] key when cycling from
lower to higher taps or pressing the [LTC LOWER] key when cycling from higher to
lower taps will start capturing data.
The following screen will be displayed indicating that the test is in progress:
h. When the pre-defined test time has elapsed or the [STOP] key is pressed, the “PRINT
TEST RESULTS?” menu will be displayed:
1.
YES
Press the
[1]
key (
YES
) to print the test results on the built-in thermal printer. The
following menu will be displayed:
1.
NORMAL PLOT
Press the
[1]
key (
NORMAL PLOT
) to print a normal plot. The printer will
begin to print. A typical normal (full-scale) plot is shown in figure 11.0.
Continue to step i.
2.
EXPANDED PLOT
To print an expanded plot, press the
[2]
key (
EXPANDED PLOT
).
Continue to step i.
2.
NO
Press the
[2]
key (
NO
) to bypass the printing of the test results. Continue to step
j.
SELECT PLOT TYPE:
1.
NORMAL PLOT
2. EXPANDED PLOT
PRINT TEST RESULTS?
1.
YES
2. NO
RUNNING DYNAMIC
LTC TEST T = 15
R1 = 7.369 m
Ω
“STOP” KEY TO ABORT
* XFMR ENERGIZED! *