VG-4HS432D 4 Heads LED Moving Head Beam Light User Manual VG-4HS432D 4 Heads LED Moving Head Beam Light User Manual
use in good connection grounding power system and the ground wire must connect with
the ground wire of the power supply system. The earth sign port of the light should be
connected to the installing fixtures.
11. Do not use the damage of the insulating layer wire and also do not use the power cord
overlap on the other wire. When not in use or clean the light, please disconnect the power,
don't pull the plug in hard or just drag the wires.
12. There are no components inside for maintenance. Before start operation the light,
please check whether all of the shell is installed. In the case of the shell open used the
light is prohibited.
Note: Under any installation, maintenance and clean the light, please confirm that has cut
off the power cord!
II. PRODUCT FEATURES
Built-in master-slave, sound control and show mode;
LED display, easy to control;
It’s suitable for disco, club, bar, party and DJ moving show;
DMX channel: 6CH, 10CH, 19CH, 32CH and 56CH;
Control mode: Sound (audio) detection, Show mode, DMX and Master/slave;
Input voltage: AC100-240V, 50/60Hz;
Fuse: F3AL250V
Power consumption: 200W
LED source: 4pcs 32W RGBW 4in1 LEDs
N.W.: 11KG
Light body dimension: 1000*260*90mm
Light Lumens:
Color
1M
2M
Unit
R1
24000
11500
LUX
G1
50000
18000
B1
80000
27000
W1
68000
26000
III. FUNCTION DESCRIPTION
No.
Function
1
3-pin DMX OUT
2
5-pin DMX OUT
3
Power output
4
Safety loop (fixed safety wire)
5
Stand bracket (fixed stand)
6
LCD display
7
Display buttons
8
Power switch
03
02
