Vanderbilt VR4 S-MF Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 24

Vanderbilt VR4 S-MF Series Скачать руководство пользователя страница 6

3 Safety regulations

3 Safety regulations

General

l

Follow all warnings and instructions marked on the device.

l

Keep this document for reference purposes.

l

Please take into account any additional country-specific, local laws, safety

standards or regulations concerning installation, operation and disposal of the
product.

Liability claim

l

Do not make any changes or modifications to the device.

l

Use only spare parts and accessories that have been approved by the

manufacturer.

3.1 Standards and guidelines

European directives

Vanderbilt hereby declares that this product is in compliance with the essential

requirements and other relevant provisions of Directive 2004/108/EC on

Electromagnetic Compatibility (EMC).

The EC Declaration of Conformity is available from your Vanderbilt sales office or:

Vanderbilt International (IRL) Ltd.

Clonshaugh Business and Technology Park

Clonshaugh

Dublin 17

Ireland

.

3.2 FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

6

Vanderbilt International (IRL) Ltd.

2017-04-12

«
...
4
5
6
7
8
...
»

Содержание VR4 S-MF Series

























Отзывы:

Нет отзывов