System Backup & Recovery
© Vanderbilt 2016
52
10
System Backup & Recovery
The NVR introduces a
Backup and Recovery Tool
. By a VHD (Virtual Hard Disk)
inside, the
Backup and Recovery Tool
allows backing up the system state,
including the software settings, on a certain date and time so the state can be
recovered when some day in the future the system or the application is
misbehaving or just doesn't cooperate with your operation. With the
Backup and
Recovery Tool
, the system can also be brought to factory defaults.
In the following of this chapter, you will be guided to the following subjects:
10.1 Back up System State
It relies on the Backup and Recovery Tool to bring the system back to the much
more stable state on a previous date and time. To enable such recovery, the
backup of system state (including software settings) is necessary.
To back up the system state:
Restart the system.
When
Windows
Boot
Manager
shows onscreen, select
Backup
and
Restore
Tools
.
The “
Backup and Restore Tools
” then shows onscreen.
Select option 1, which should be a storage device, by entering 1 and hitting
the Enter key.
Select
Backup
by entering 1 and hitting the Enter key.
If you select any option by mistake, enter 0 and hit the Enter key to go back
to the previous step.
Select
option 1.
