Vanderbilt SPCK620, Руководство по установке и настройке

Страница: 35 / 368

Technical Data 4
SPC6000
35
Vanderbilt Installation & Configuration Manual A6V10276959
01.05.2016
Dimensions (W x H x D)

SPC5320: 264 x 357 x 81 mm

SPC5330: 326 x 415 x 114 mm

SPC5350: 498 x 664 x 157 mm
Housing

SPC5320: Small metal housing, (1.2 mm mild steel)

SPC5330: Hinged metal housing, (1.2 mm mild steel)

SPC5350: Metal housing (1.5 mm mild steel)
Housing can contain up to

SPC5320: 1 additional expander,

SPC5330: 4 additional expanders (size 150 mm x 82
mm)

SPC5350: 4 additional expanders (150 x 82 mm)
IP / IK Rating 30 / 06
ATS 5
ATP 15
Event Profiles 10
Event Exceptions 50
Command Profiles 8
1) Max. 400 m between devices / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP
cat5 (solid core) or Belden 9829.
2) More I/O expanders can be addressed instead of a keypad or door expander,
but number of programmable inputs / outputs cannot exceed specified system
limits.
4.3 SPC6000
Programmable areas 60
Max. number of user PINs 2500
Remote controls Up to 100
Wireless Panic Alarm Up to 128
Event memory 10,000 intrusion events, 10,000 access events
Number of on-board zones

SPC6320\6330 — 8

SPC6350 — 16
Max. number of hardwired
zones
512
Max. number of wireless
zones
120 (take away wired zones)
Max. number of Intrunet
wireless detectors per
wireless receiver
(recommended)
20
EOL resistor Dual 4k7 (default), other resistor combinations configurable
Relay Outputs

SPC6320\6330 — 1 strobe (30 VDC/1A resistive
switching current)

SPC6350 — 4 (single-pole changeover, 30VDC/
maximum 1A resistive switching current)