Keyboard Operation
© Vanderbilt 2017
32
Dome by RS-485
The keyboard can connect with the analog dome or PTZ unit via RS-485 serial port, and realize PTZ control.
Before you start:
Check the connection between the dome and the Keyboard. The
T+
ad
T-
terminals of the keyboard’s RS-485
serial port must be connected with the
T+
and
T-
terminals of the dome respectively.
1.
Enter the
Dome by RS-485
operation mode on the keyboard.
2.
Press the
Num + CAM
buttons to select the dome site.
3.
Use the joystick and operate the buttons on the keyboard panel to realize the corresponding functions.
Please refer to
to check the description of the PTZ control buttons.
Figure 6-16
Dome by RS-485
The address, baud rate, protocol and other parameters of RS-485 must be configured the same with the
dome’s RS-485 parameters.
Shortcut Operation
The device control via keyboard can be realized by shortcut operation.
1.
On the login interface, enter the user name and password to log in to the device.
Figure 6-17
Menu
2.
Use the joystick to select the
Shortcut
to enter the shortcut operation mode.
3.
Press the
Num+DEV/MON/CAM/CAM-G/PRESET/PATROL/PATTERN/WIN/MULT/SCENE
on the
keyboard buttons to realize the corresponding device operation and control.