Vanderbilt CHSM2210-B, Руководство по установке

Страница: 20 / 22

Maintenance and service
© Vanderbilt 2016 20
6 Maintenance and service
The following maintenance guidelines should be observed.
Cleaning Use only soap and water to clean the housing and window
– no abrasive solvents. Additional
protection can be applied to the window to reduce contamination and droplet formation from moisture
or rain. Products from the automotive or cleaning industry which use nanotechnology to reduce
surface energies and thus contamination and moisture build-up can be used for this purpose.
6 monthly checks 1. All fastenings and cables should be checked for tightness and wear.
2. Regular checks should be performed to ensure that the outer sheaths of the cables are not
damaged and that the cables are not fouling on any obstruction.
NOTE
This installation guide cannot cover all conceivable cases of installation, operation or maintenance.
Should you require further information or should special problems occur which are not discussed in
adequate detail in the installation guide, please request the required information from your local
Vanderbilt office.
We must also point out that the contents of this installation guide do not constitute a part of an earlier
or existing agreement. Neither do they constitute or amend any earlier or existing commitment or legal
relationship. All obligations on the part of Vanderbilt result from the relevant purchase agreement
which also contains the complete and solely valid warranty regulations. This installation guide neither
extends nor restricts these contractual warranty regulations.
7 Disposal
All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered by
the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a
precondition for reuse and recycling of used electrical and electronic equipment. For
more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.