V&D Electric Bikes Go-Bike M2, Руководство пользователя

Страница: 7 / 9

Maintenance Record
General Maintenance and Repair
CLEANING AND STORAGE
1.
Please clean your Go-Bike M2 bike promptly after use in
order to maintain the Go-
Bike’s
best performance.
2.
Use a soft cloth, such as those used to clean eye glasses,
and moistened it with a small amount water to clean the
Go-
Bike’s
body.
3.
Use a cloth to clean the Go-
Bike’s
tire; however, do NOT
wash the rear tire because it contains the motor inside. Dry
the
Go-Bike with a dry cloth after it is cleaned, and set it in a
well-ventilated location so it will dry quickly to avoid the
corrosion of the steel parts.
4.
When not in use, store the Go-Bike in a dry, cool place.
Keep the Go-Bike away from fire or direct heat.
5.
Do NOT keep the Go-Bike outside for an extended period of
time. Sun exposure and the cold/hot outdoor environment
will age the appearance of the
Go-Bike more quickly.
PRECAUTIONS
1.
When cleaning the Go-Bike, ensure it is powered off, unplug
the charging cable and close the charging port cover!
Otherwise, it may cause an electric shock or serious defects
to the
Go-Bike .
2.
Do not use high-pressure water jets to clean the bike or
soaked in water for washing, that would cause the water
came into the body or collected in the bike, which will result
in severe irreparable failure.
3.
Do not use alcohol, gasoline, kerosene, acetone or other
corrosive and volatile chemical solvents to clean the
Go-
Bike’s
body. These substances can damage the exterior and
interior of the bike.