CONNECT AND OPERATE
1. Connect the provided emitter(s) the numbered Emitter Output ports on the main unit
2. Locate the IR EYE window on the source device. This can usually be seen when using a flashlight pointed at the front of the source at an angle or can be found in the
product’s user manual
3. Place and/or stick each IR emitter onto the sources. See the illustration above for correct IR emitter placement
4. Connect the provided IR Receiver to the IR IN port of the main unit
5. Place IR receiver at display location, must be line of sight from remote signal (test by ensuring IR feedback LED emits when sending IR signals from remote)
6. Connect the provided 12V DC power supply into the main unit and test
PRODUCT MANUAL
Part Number: IR-EXPKIT
NOTE: Signal adjustment is a scale from 1-10; with 1 being the weakest output, and 10 being the strongest
Front Panel
Back Panel
Sources
Output
HDTV
BluRay® Player
Amplifier
Streaming Box
DVD Player
TECHNICAL SUPPORT
www.vanco1.com 800.626.6445