Vanco HDEXWIR, Руководство пользователя

Страница: 7 / 12

www.vanco1.com 800-626-6445
7
CONNECT AND OPERATE
1. Connect the Transmitter to an HDMI source
2. OPTIONAL: Connect the provided IR Blaster into the IR OUT port of the Transmitter
3. Connect the Receiver to an HDMI display
4. OPTIONAL: Connect the provided IR Receiver into the IR IN port of the RECEIVER
5. Connect both power supplies to the TRANSMITTER and RECEIVER using the provided power supplies, with
the TRANSMITTER first, followed by the RECEIVER
6. To pair both units to each other, press the PAIR button on the Transmitter first, and then the Receiver
NOTE: If there is no signal, press the RESET button on the TX and/or RX, and repeat the pairing process.
NOTE: Transmission distance may differ based on certain environmental factors such as other wireless signals
that can interfere with transmission. Solid core walls, brick, or glass can significantly shorten the range at
higher resolutions.
IR
Transmitter