Connection Diagram
1. Connect a source such as a Blu-Ray player, video game console, receiver, etc. to the HDMI input on the TX unit.
2. Connect a display such as an HDTV or HD projector to the HDMI output on the RX unit.
3. Connect a single Cat5e/6 cable to the UTP output of the TX unit and the other end to the UTP input of the RX unit.
4. OPTIONAL – Connect an HDMI display, AVR, or other component to the HDMI loop-out port on the TX unit.
5. For power, plug in the provided DC 5V power suppy to either the TX or RX unit.
6. Power on each device in the same sequence.
HDTV
HDTV
Source
Transmitter (TX)
Receiver (RX)
Cat5e/6
IR Signal (TX)
HDMI
Loop-Out
HDMI
IR Signal (RX)
HDMI
Panel Descriptions
Transmitting Unit (TX)
• HDMI Out: HDMI loop-out for additional components
•
LINK: LED light for signal status of extender
•
HDMI IN: Connects to a HDMI source
•
RESET: Resets connection
•
Cat5e/6: Connect a well terminated Cat5e/6 cable, direct
cable runs are strongly recommended with no coupling
points or patch panels
•
IR OUT: Connect provided IR Blaster (TX) for control of
source side device
•
DC 5V: Connect the included power supply (product
includes PoE - connect power to only one unit)
Receiving Unit (RX)
•
RESET: Resets receiver equalization
•
Cat5e/6: Connect a well terminated Cat5e/6 cable, direct
cable runs are cabling strongly recommended with no
coupling points or patch panels
•
LINK: LED light for signal status of extender
•
IR IN: Connect provided IR Receiver (RX) to receive IR
commands from the display side
•
HDMI OUT: Connects to an HDMI display
•
DC 5V: Connect the included power supply (product
includes PoE - connect power to only one unit)
HDEX60 Product Manual
©2023 Vanco International LLC | Batavia, IL 60510 USA |
Page 3 of 4
