
www.vanco1.com
800-626-6445
5
PANEL DESCRIPTIONS
1. Firmware: Micro USB port for updating firmware
2. Power Indicator: OFF: No power; GREEN: DC power present; RED: Standby Mode
3. 8 input selector buttons & 8 green indicators. num-bered from “1” to “8”.
4. 8 output selector buttons & 8 green indicators, press the buttons to switch input cycle for the outputs
5. HDMI Inputs: 8 x HDMI input ports, type A female HDMI connector, connect the Source with an HDMI cable to
any of the HDMI inputs.
6. Outputs:
- 7 x HDBaseT outputs: The HDBT RJ45 outputs deliver HD video, Audio and PoC to the HDBaseT
Receiver up to 70m.
- 1 x HDMI output: Connect an HDMI cable from the Matrix Switcher to the displayer.
7. IR IN:
- 7 x IR IN: Connect with IR receiver, fixed IR input for the output, cannot be switched separately. It makes
up an IR bi-directional transmission with the IR OUT on the corresponding HDBaseT receiver.
- 1 x IR EYE: Connect with extended IR receiver, use the IR remote to control the Matrix Switcher.
8. IR OUT:
- 8 x IR OUT: Plug in IR emitters to deliver the IR signal sent from the far-end receivers connected to the
HDBaseT ports. These IR OUT sockets make up an IR matrix with the IR IN sockets on the far-end
receivers, and all can be switched simultaneously with the AV signal, or separately from switching. In
default setting, the 1~7 IR OUT corresponds with the 1~7 IR IN, i.e. IR OUT1 - IR IN1, IR OUT2 - IR IN2,
…IR OUT7 - IR IN7.
- 1 x IR ALL OUT: Plug in IR emitter to deliver the IR signal to control input source device from any of far-
end receivers
9. CONTROL: RS232: Serial port for unit control, 3-pin pluggable terminal block, connects with control device (e.g.
PC); TCP/IP: RJ45 port. Connect with PC for Web-based GUI control.
10. AUDIO OUTPUTS: SPDIF: Digital audio output connects directly via an optic fibre cable to the Toslink input on a
sound bar; RCA (L&R): PCM Analogue audio output sockets connect the de-embedded audio additional speakers.
11. AC100V~240V: Power port, connect with power cord
8
6
7
9
10
11
4
1
2
3
5
Selector Switch