www.vanco1.com
800.626.6445
6
PANEL DESCRIPTIONS
1. POWER LED: Illuminates red when unit is powered on
2. Four Input LEDs: Illuminates orange when there is video signal on its corresponding input channel; no
illumination when signal is not present; illuminates green when source is selected
3. AUTO LED: Illuminates green when in auto-switching mode; no illumination when in manual-switching mode
4. SELECT AUTO/3s: Selects source in sequential order; press and for 3 seconds to enable auto-switching
mode
a. Please refer to the Button Control Section for more details regarding switching rules
5. DISPLAY ON: Press the button to send Display On command to turn on the display. Note that the RS232
command needs to be setup. If an exception occurs at the AirPlay/Miracast input, press and hold the
button for 3 seconds to reset
6. DISPLAY OFF: Press the button to send Display Off command to turn off the display. Note that the RS232
command needs to be setup
7. EDID: 4-pin DIP switch for EDID adjustment
8. FW: Micro USB port for firmware upgrade
a. Any available firmwmare updates will be available on www.vanco1.com, under the “downloads” tab of
the webpage for this product
1
Front Panel
2
4
5
6
7
8
3
