www.vanco1.com
800.626.6445
8
To Control the Display:
1. Plug the IR Receiver into the
IR IN Port on the Transmitter
2. Plug the IR Blaster into the
IR OUT Port on the Receiver
To Control the Source:
1. Plug the IR Blaster into the
IR OUT Port on the Transmitter
2. Plug the IR Receiver into the
IR IN Port on the Receiver
IR RECEIVER (RX)
•
To control the source: Plug IR Receiver into IR IN port of receiver unit (EVEX4K50-RX); place receiver at
or near display
•
To control the display: Plug IR Receiver into IR IN port of transmitter unit (EVEX4K50-TX); place
receiver in position where it is able to receive remote signals
