Vanco EVEX2003, Руководство пользователя

Страница: 8 / 12

www.vanco1.com 800.626.6445 8
IR PASS-THROUGH
IR Blaster TX IR Receiver RX
IR BLASTER (TX)
To control the source: Plug IR Blaster into IR TX port of transmitter unit (EVEX2003-TX);
place blaster in front of the IR eye of the source.
To control the display: Plug IR Blaster into IR TX port of receiver unit (EVEX2003-RX); place
blaster in front of the IR eye of the display.
IR RECEIVER (RX)
To control the source: Plug IR Receiver into IR RX port of receiver unit (EVEX2003-RX);
place receiver at or near display.
To control the display: Plug IR Receiver into IR RX port of transmitter unit (EVEX2003-TX);
place receiver in position where it is able to receive remote signals.
IR Blaster TX IR Receiver RX
1. IR Signal
2. Grounding
1. IR Signal 20-60 kHz)
2. Grounding
3. Power