Vanco 280621, Руководство пользователя

Страница: 6 / 16

www.vanco1.com 800-626-6445
6
EDID
The EDID switch allows for EDID learning or to pre-set an EDID to encourage a “handshake” between the
display and source.
The EDID switch helps out in forcing or encouraging a handshake between the source and display with the
extender in between. If you are not receiving a video/audio signal with the extender in place, verify the
category cable isn’t the issue by connecting a pre-terminated jumper or patch cable. Also verify the source is
actually sending a signal by connecting straight to the display via HDMI.
See below for EDID table, when any of the EDID position selections are made, the Transmitter will set a fixed
EDID to the source. To make this adjustment, follow the below steps while every component is TURNED ON.
1. Unplug the POWER SUPPLY (if connected, if not and utilizing PoE, unplug category cable to power off
Transmitting unit ) and HDMI cable from the Transmitting unit only.
2. Adjust the EDID switch to the desired setting
3. Connect the Power Supply
4. Connect the HDMI cable
At this point the EDID you’ve selected is now sent to the source, check the display for video/audio signals.
NOTE: The port will only read the DIP switch settings on power-up. The device must be powered off and then
back on again for it to implement any change of the DIP switch settings.
Mode Dip Switch EDID Info
Mode 1 0000 1080p@60Hz, Audio 2CH PCM
Mode 2 0001 1080p@60Hz, Audio 5.1CH PCM/DTS/DOLBY
Mode 3 0010 1080p@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
Mode 4 0011 1080i@60Hz, Audio 2CH PCM
Mode 5 0100 1080i@60Hz, Audio 5.1CH PCM/DTS/DOLBY
Mode 6 0101 1080i@60Hz, Audio 7.1CH PCM/DTS/DOLBY/HD
Mode 7 0110 1080p@60Hz/3D, Audio 2CH PCM
Mode 8 0111 1080p@60Hz/3D, Audio 5.1CH PCM/DTS/DOLBY
Mode 9 1000 1080p@60Hz/3D, Audio 7.1CH PCM/DTS/DOLBY/HD
Mode 10 1001 4K2K, Audio 2CH PCM
Mode 11 1010 4K2K, Audio 5.1CH PCM/DTS/DOLBY
Mode 12 1011 4K2K, Audio 7.1CH PCM/DTS/DOLBY/HD
Mode 13 1100 DVI 1280x1024@60Hz, Audio None
Mode 14 1101 DVI 1920x1080@60Hz, Audio None
Mode 15 1110 DVI 1920x1200@60Hz, Audio None