www.vanco1.com
800-626-6445
7
OPERATION CONTROL - IR REMOTE CONTROL
OUTPUT A: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT A,
the LED will indicate the corresponding input source.
OUTPUT B: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT B,
the LED will indicate the corresponding input source.
OUTPUT C: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT C,
the LED will indicate the corresponding input source.
OUTPUT D: Pressing the 1\2\3\4 buttons will select input source to HDMI OUTPUT D,
the LED will indicate the corresponding input source.
OPERATION CONTROL - SOFTWARE CONTROL THROUGH
RS-232 OR TCP/IP
1. System Requirement
1) OS Information: MS WinXP/7
2) Baud rates: 9600
3) Software size: 3 MB
4) Minimum RAM requirement: 256 MB
Installation:
•
Connect the PC and Matrix unit via the supplied RS-232 cable (Female to Female cable)
•
Power up Matrix unit
•
Double click MatrixController.exe icon to run it
