Vanco 280547, Руководство пользователя

Страница: 4 / 8

www.vanco1.com
800-626-6445
4
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
280547:
• Distribution Hub and (1) Receiver
• (2) 12V/2A DC Power Supplies
• User’s Manual
280548:
• (1) Receiver
• (1) 12V/2A DC Power Supply
• User’s Manual
CONNECT AND OPERATE
1. Connect 1 source such as a PC or laptop that has a VGA output to the VGA input on the distribution hub
(a VGA output can also be connected at the distribution hub).
2. Connect the audio source using a 3.5mm cable into the 3.5mm jack (input) on the distribution hub (there
is also an audio ouput on the distribution hub).
3. Connect 1 display such as an HDTV or HD Projector that has a VGA input to the VGA output on the
receiver balun (280547/280548 supports dual output and can output video at both distribution hub and
receiver baluns).
4. Connect the audio output on the receiver balun to the display device using a 3.5mm cable
(280547/280548 supports dual output and can output audio at both distribution hub and receiver
baluns).
5. Connect a single Category 5e or 6 cable to both distribution hub and receiver baluns.
6. For power, plug in the source first, followed by the Receiver(s) and then Distribution hub (two 12V DC
power supplies included for 280547, one 12V DC power supply included for 280548), followed by the
output connected.
7. Power on each device in the same sequence (receiver and distribution hub will already be powered when
plugged in).
At this point the display connected should display the source signal connected to the distribution system. If
no signal is being displayed, connect a shorter Cat5e/6 cable (less than 15 ft). If no signal is still displaying,
adjust the EQ and GAIN controls, if a signal displays with the shorter category cable, the EQ distance will
need to be adjusted to the longer category cable being used. If a display is having difficulty receiving a signal,
access the display’s menu and adjust the resolution (lowest to highest until signal is displayed). A 24 Hz
vertical refresh rate may work better than 60 Hz or higher.