7
6.0
INSTALLATION OF OPTIONAL MOUNTING COMPONENTS
The 1x2 Digital Splitter/Extender (Part No. 280332) can be mounted on any flat surface.
Mounting the 1x2 Splitter/Extender
Attach the two “L” shaped mounting brackets to the product using the furnished hardware and
then attach the combined assembly to the desired location.
Note that the holes on the brackets are offset to allow easier mounting to the flat surface after
you’ve attached the brackets to the switcher.
7.0
TROUBLESHOOTING
In the event of problems, first make certain that the input cable is no more than 50 feet long,
none of the output cables are more than 50 feet long and all cables are of premium
construction such as Vanco or equivalent.
Next, make certain that the Splitter/Extender is receiving power by looking at the power LED.
It should be illuminated and not flickering or intermittently going on and off. Intermittent
operation generally means a problem with the DC adapter or low AC voltage being applied to
the DC adapter’s input.
If all is well in these areas, remember that HDMI devices communicate with one another so
the source device and all destination devices must be fully HDMI capable. In addition, HDCP
encryption requires additional processing which also is dependent on the equipment you
