VanAccess WP0001, Руководство пользователя, Страница: 88 / 90

• Make sure both Skype™ and the PC application is/are started on the PC
and
running properly.
• Make sure the phone is set up correctly.
• Wait for the remote party to be online.
Q11. Why can I not hear any sound from the phone while the Wireless
Link USB dongle is plugged in to the PC and the wireless setup is
properly established?
A11. When the Wireless Link USB dongle is plugged in to the USB port of your PC,
the Phone Voice stream will be routed to the handset. If you cannot hear any
voice from the phone, check the setting of Sound Devices in Skype
TM
. Go
to Skype™ > Tools > Options > Sound Devices and make the following
settings:
Audio In: Virtual Cable 1
Audio Out: Virtual Cable 2
Ringing: Virtual Cable 2
Q12. Why can I not hear any sound from the PC speakers for normal PC
operation while the Wireless Link USB Dongle is plugged in to the PC?
A12. The PC default audio setting might be in the wrong order. You can change
back the setting of your PC audio by going to Control panel > Sound >
Speech
and Audio Device > Sound and Audio Device > Audio. Check Only use
default devices
.
Q13. What will I do if the phone is out of operating range? How come no
signal is detected?
A13. When the phone is out of the Wireless Link USB dongle’s operating range, the phone
will keep accessing its signal source for 30 seconds. If detecting the signal
fails, the screen shows the message “
WiFi Disconnect ” and then goes into
sleep mode.
To regain the connection, move the handset closer to the Wireless Link USB
dongle and press any key on the handset for access retrieval.
A-22 Appendix: Reference information