Van Walt Rain Gauge Скачать руководство пользователя страница 17

Страница: 17 / 24

Operating Instructions

Rain Gauge

VAN WALT

Monitoring your needs

The e-SENSE SMS modem (field modem) and e-SENSE direct do support alarm functionality. When

an SMS modem detects an active alarm status for a sensor, e-SENSE direct can transmit an alarm

message via the SMS modem direct to a mobile telephone number.

The values of alarm and hysteresis must be within the interval constituted by on the one side the

Reference and on the other side by the sum of Reference and Range.

In formula: Ref. <= Alarm <= (Ref. + Range)

and Ref <= Hysteresis <= (Ref. + Range)

The user must always (also when no telemetry is used) fill in the values for alarm high, hysteresis

high, alarm low and hysteresis low.

The integrator function can be used to determine daily, weekly or monthly totals on the basis of

rain intensity measurements. If it is necessary to start obtaining measurement totals, the starting

value of the integrator can be set at zero, which can be done by adjusting the datalogger’s

Master setting to the value ‘-0’. This is called the ‘resetting’ of the integrator. In this way, the rain

intensity measurements can be used to determine daily, weekly or monthly totals on the basis of

daily measurement samples.

Applications

The following e+ sensors are currently available:

• Rain fall (intensity and total)

• Soil moisture (volume fraction, conductivity and temperature)

In due course e+ sensors will also be available for the following areas of application:

-Wind (direction and speed)

-Soil erosion

-Atmospheric conditions (moisture and temperature) -Evaporation

-Atmospheric

pressure

-Tension

-Temperature

-Pulse

-Radiation (pyrano and albedo)

-Current

-Flumes (flow rate)

-Conductivity

-Infiltration

-Serial

The following Divers are currently available for the following applications:

-Diver (water level and temperature)

-CTD-Diver (water level, temperature and

conductivity)

-BaroDiver (atmospheric pressure and temperature)

-OTD-Diver (water level, temperature and

dissolved

oxygen)

Содержание Rain Gauge

























Результаты поиска

Содержание Rain Gauge

Отзывы:

Van Walt Rain Gauge, Руководство по эксплуатации, Страница: 17 / 24

Результаты поиска

Содержание Rain Gauge

Отзывы: