Van Raam Chat, Руководство пользователя, Страница: 6 / 38

User Manual | Chat 19.06
5
MIN INSERT
Adjustment of the tricycle
Before using the tricycle, adjust its height to the height of the rider. This is of essential
importance, especially with regard to the
, saddle, handlebars and seat.
If an optimum setup with specified instructions is not possible you can contact your
dealer for a suitable solution.
The brakes are always properly adjusted and may only be adjusted during regular
maintenance by your dealer.
Take care that fingers and limbs do not get trapped while adjusting the tricycle.
Saddle Height
You can correctly set the saddle height by sitting
on the bike and placing your foot on the pedal in
the lowest position. Make sure your leg is
stretched, yet still relaxed.
To adjust the saddle:
1. Open the quick-clamp [A].
2. Slide the saddle to the correct height.
3. Close the quick-clamp.
Make sure clothing cannot get caught in the clamp!
If the clamp closes too easily, the clamping force is
too low. In this case, open the clamp and tighten the
nut [B] a bit more. If a lot of force is necessary to
close the clamp, the nut should be loosened slightly.
Don't pull out the seat post further than the markings. If you do so,
the tube won't be inserted deep enough into the shaft, increasing
the risk of breakage, which may lead to serious injuries.
[B]
[A]