vM MA260 STEREO MAIN AMPLIFIER
2
BEFORE GETTING STARTED
IN GENERAL
When using your Van Medevoort product make sure that the following is observed:
-
The cooling air vents are not covered
-
The air can move freely around the product
-
The product is sited on a vibration-free surface
-
The product is not exposed to (very) high temperatures, cold, moist or dusty environments
-
Do not expose the product to direct sunlight
-
Do not expose the product to electrostatic discharges
-
Never put any type of object directly on top of the product
When in doubt do consult your Van Medevoort dealer. If any object and/or water and/or moisture
should find its way into the unit, always disconnect the power cord by its plug, never by the cord itself.
When leaving for extended periods, e.g. holidays, we strongly recommend that you unplug all audio
equipment. This is also advisable when there is a thunderstorm or lightning.
CONNECTING
Before actually making any connections, always disconnect the power cord from the wall socket by its
plug, never by the cord itself, or switch the product
OFF.
Always connect one source at a time and make sure that Left & Right channels are not interchanged.
Make sure that the plug is fitted correctly. Otherwise, hum and/or noise may be apparent.
DO NOT forget to read the respective manuals of the products you wish to connect to this product,
BEFORE connecting.
POSITIONING
If this product
is being used at the same time as e.g. a Computer and/or a TV-tuner, you may
experience various anomalies. When this is the case, please follow these instructions:
-
Position the product as far away as possible from this type of item
-
Make sure that the tuner interconnect is detached as far away as possible from all radio
and/or TV power cords.
-
Usually these anomalies occur when a 300 Ohms cable is used. We advise you to change to
a well shielded 75 Ohms cable.
Содержание MA260
Страница 1: ...M A 2 6 0 INSTRUCTION MANUAL...
